ScreenerKing replacement screens are manufactured as direct drop-in replacements for Sweco vibratory separators. Every screen matches the exact frame outside diameter, ring height, and gasket seating dimensions of the corresponding Sweco model, so you can install ScreenerKing screens on your existing Sweco equipment without any modification, adapter, or adjustment. Same fit, same performance, competitive pricing, and fast delivery from our Houston, Texas manufacturing facility.
Sweco is one of the most widely used vibratory separator brands in the world, with tens of thousands of units operating across food processing, pharmaceutical, chemical, plastics, mining, and general industrial applications. If you operate any Sweco round separator, ScreenerKing has a replacement screen that fits your machine.
Which Sweco Models Accept ScreenerKing Screens?
ScreenerKing manufactures replacement screens for every standard Sweco round vibratory separator. The table below shows the complete compatibility list.
| Screen Diameter | Compatible Sweco Models | Available Materials | Mesh Range |
|---|---|---|---|
| 18" | LS18, S18 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 24" | S24, LS24 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 30" | S30, LS30, ZS30 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 36" | S36 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 40" | S40 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 48" | S48, US48, ZS48 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
| 60" | S60, US60, ZS60 | 304 SS, 316 SS, T-430 | 3.5–635 mesh |
If your Sweco model is not listed or you have a specialty configuration, contact our team at (866) 265-1575. We can manufacture screens to match any Sweco separator dimension.
How Do ScreenerKing Screens Fit Sweco Equipment?
ScreenerKing screens match Sweco separator deck openings through precise manufacturing of three critical dimensions:
- Outside diameter (OD): The screen frame OD matches the deck opening in your Sweco separator to within fractions of an inch. The screen seats into the same position as the original Sweco screen.
- Ring height: The frame ring height matches the Sweco specification so the screen sits at the correct depth in the separator body and clamps properly with your existing hardware.
- Gasket channel: The gasket seating area on the ScreenerKing frame accepts standard Sweco-compatible gaskets. You can use your existing gaskets or order new gaskets from ScreenerKing.
Installation is identical to installing a Sweco OEM screen. Remove the old screen, clean the deck seating surface, place the ScreenerKing screen into position, install the gasket if replacing it, and secure with your existing clamps. No tools, adapters, or modifications are needed beyond what a standard screen change requires.
What Screen Materials Are Available for Sweco Separators?
ScreenerKing offers three stainless steel options for Sweco replacement screens, matching and exceeding the material options available from the OEM:
304 Stainless Steel
304 stainless steel is the most common screen material and the standard choice for food, pharmaceutical, chemical, and general industrial applications. It provides excellent corrosion resistance in most environments and is the material used in the majority of Sweco OEM screens. 304 SS is the default recommendation unless your application involves specific corrosion or abrasion challenges.
316 Stainless Steel
316 stainless steel provides superior corrosion resistance compared to 304, particularly in environments involving chlorides, acids, and aggressive cleaning chemicals. It is the standard choice for pharmaceutical cGMP applications, marine environments, and any process involving corrosive materials. If your Sweco separator handles pharmaceutical excipients, acidic food products, or chemical intermediates, 316 SS is the recommended upgrade.
T-430 Stainless Steel
T-430 stainless steel is a ferritic stainless steel that offers the best abrasion resistance of the three options. It is ideal for screening abrasive materials including minerals, aggregates, glass, ceramics, and recycled materials. If your Sweco separator processes material that wears through 304 SS screens quickly, T-430 can significantly extend screen life.
Why Switch from Sweco OEM Screens to ScreenerKing?
Operators switch from Sweco OEM screens to ScreenerKing for several practical reasons:
- Cost savings: ScreenerKing screens are priced 20 to 40 percent below Sweco OEM screens for the same size, mesh, and material. For operations replacing screens regularly, this translates to significant annual savings.
- Faster delivery: ScreenerKing manufactures and ships from Houston, Texas. Standard screens ship within days. Sweco OEM lead times can extend to weeks depending on the size and mesh combination.
- Same materials and construction: ScreenerKing screens use the same grade stainless steel wire mesh as OEM screens, bonded to precision frames with industrial-grade epoxy. The manufacturing process and quality standards match what Sweco delivers.
- Full mesh range: ScreenerKing stocks and manufactures screens in every standard mesh size from 3.5 mesh to 635 mesh, matching the complete Sweco catalog.
- Technical support: Our team includes screening specialists with decades of experience who can recommend the optimal mesh size, material, and screen configuration for your specific application—not just sell you a screen.
How to Order ScreenerKing Screens for Your Sweco Separator
Ordering replacement screens for a Sweco separator is straightforward. You need three pieces of information:
- Screen diameter: The nominal size of your Sweco separator (18", 24", 30", 36", 40", 48", or 60"). If unsure, measure the outside diameter of your existing screen frame.
- Mesh size: The mesh size currently installed on your separator, or the mesh size recommended for your application. Use our mesh size chart if you need to convert between mesh, microns, or millimeters.
- Screen material: 304 SS (standard), 316 SS (corrosion resistant), or T-430 (abrasion resistant). Use our material selection guide if unsure which material is best for your process.
Browse our replacement screen collection, call (866) 265-1575, or request a quote online for pricing on your specific configuration.
Sweco Replacement Screen FAQs
Do ScreenerKing screens fit Sweco separators?
Yes. ScreenerKing screens are manufactured to match the exact frame dimensions of Sweco vibratory separators and install as direct drop-in replacements on all standard Sweco round models without any modification to your equipment.
What Sweco models accept ScreenerKing screens?
All standard Sweco round separator models: LS18, S18, S24, LS24, S30, LS30, ZS30, S36, S40, S48, US48, ZS48, S60, US60, and ZS60.
Are ScreenerKing screens the same quality as Sweco OEM?
Yes. ScreenerKing screens use the same grade stainless steel wire mesh and are manufactured with equivalent precision. Every screen is inspected for mesh accuracy, frame dimensions, and bond integrity before shipping. Many customers report equal or longer screen life compared to OEM.
How much can I save switching from Sweco OEM to ScreenerKing?