ScreenerKing manufactures compatible replacement screens and parts for Rotex gyratory reciprocating screeners and vibratory separators. Our screens are engineered to match the exact frame dimensions and material specifications of Rotex OEM screens, providing a direct-fit replacement that installs without modification — at a lower cost and with faster lead times from our Houston, Texas manufacturing facility.
What Is Rotex Screening Equipment?
Rotex, now part of Hillenbrand's Process Equipment Group, is one of the most recognized names in industrial screening. The company is a specialist in gyratory reciprocating screening technology, which combines a gyratory (near-circular) motion at the feed end of the screen with a reciprocating (back-and-forth) motion at the discharge end. This dual-motion approach provides highly efficient material stratification and screening, particularly for dry bulk materials.
Rotex screeners are installed across a wide range of industries, including agriculture, food processing, chemicals, plastics, minerals, fertilizer, and recycling. The company operates in eight countries and its equipment is trusted for high-capacity, high-efficiency screening of bulk solids. Rotex machines are commonly found handling grains, sugar, salt, fertilizers, plastic pellets, mineral powders, and many other dry materials.
While Rotex is best known for rectangular gyratory reciprocating machines, they also offer round vibratory separators and other screening configurations. ScreenerKing manufactures compatible replacement screens for Rotex round vibratory separator models, as well as screen panels for select rectangular units, providing operators with a quality aftermarket option for their consumable screening media.
Which ScreenerKing Screens Fit My Rotex Equipment?
ScreenerKing manufactures compatible screens for Rotex round vibratory separator models. The table below shows the cross-reference between common Rotex round separator sizes and ScreenerKing replacement screen diameters.
| Screen Diameter | Rotex Equipment Type | ScreenerKing Replacement Screen | ScreenerKing Complete Unit |
|---|---|---|---|
| 18" | Rotex Round Separator 18" | SiftPro 18 Screen | SiftPro 18" |
| 24" | Rotex Round Separator 24" | SiftPro 24 Screen | SiftPro 24" |
| 30" | Rotex Round Separator 30" | SiftPro 30 Screen | SiftPro 30" |
| 48" | Rotex Round Separator 48" | SiftPro 48 Screen | SiftPro 48 |
| 60" | Rotex Round Separator 60" | SiftPro 60 Screen | SiftPro 60 |
For Rotex rectangular gyratory screener panels, contact us with your model number and panel dimensions for a custom quote. We can manufacture screen panels to match your Rotex rectangular equipment specifications.
Use our OEM cross-reference chart for additional model matching, or contact our team for help identifying the right screen for your Rotex equipment.
What Mesh Sizes Are Available for Rotex Compatible Screens?
ScreenerKing offers compatible screens for Rotex equipment across the full range of mesh sizes used in industrial screening:
| Mesh Range | Typical Application | Available Diameters |
|---|---|---|
| 4 mesh – 30 mesh | Coarse scalping, pellet grading, oversize removal | 18" – 60" |
| 35 mesh – 100 mesh | Mid-range classification, granular separation, fertilizer grading | 18" – 60" |
| 120 mesh – 230 mesh | Fine screening, powder classification, sugar grading | 18" – 60" |
| 270 mesh – 500 mesh | Ultra-fine screening, de-dusting, fine powder check-screening | 18" – 60" |
Visit our mesh size chart for a complete reference of mesh openings in microns and inches. If you need help selecting the right mesh size for your application, our engineers are available at no charge.
What Screen Materials Are Available for Rotex Compatible Screens?
ScreenerKing manufactures compatible screens for Rotex equipment in the same material grades used by the OEM:
- 304 Stainless Steel — The industry standard for food, chemical, and general industrial applications. Excellent corrosion resistance and durability.
- 316 Stainless Steel — Superior corrosion resistance for pharmaceutical, chemical, and high-purity applications where chloride exposure or aggressive environments are a concern.
- T-430 Stainless Steel (Magnetic) — A ferritic stainless steel for applications requiring magnetic detection or where 400-series steel is specified.
- Carbon Steel — An economical option for non-corrosive dry bulk applications where stainless steel is not required.
Read our material selection guide for detailed recommendations based on your product and operating conditions.
What Other Rotex Compatible Parts Does ScreenerKing Offer?
ScreenerKing supplies a full range of replacement parts designed to fit Rotex screening equipment:
Screen Frames
Replacement screen frames for Rotex round separators in all standard sizes (18" through 60"). Our frames match the exact ring diameter and cross-section profile required by Rotex equipment for proper clamping and sealing.
Gaskets
Replacement gaskets in neoprene, silicone, Buna-N, and FDA-compliant materials. Available for all standard Rotex round separator sizes.
Springs
Replacement springs manufactured to match the spring rate, height, and mounting specifications required by Rotex round vibratory separators for proper vibration amplitude and screening performance.
Motors
ScreenerKing offers ItalVibras vibratory motors as direct replacements for Rotex separator motors. These motors deliver equivalent force, speed, and reliability with matching mounting patterns for drop-in installation.
Browse all available parts in our parts and accessories collection.
How Do I Identify My Rotex Screener Model?
To order the correct compatible screen, you need to know your Rotex equipment model and screen dimensions. Follow these steps:
- Check the equipment nameplate. Every Rotex screener has a nameplate listing the model number, serial number, and specifications. The nameplate is typically located on the machine housing or base frame.
- Determine the machine type. Identify whether your Rotex equipment is a round vibratory separator or a rectangular gyratory reciprocating screener. This determines the screen geometry (round vs. rectangular panels).
- Note the screen size. For round separators, record the screen diameter. For rectangular machines, record the screen panel length and width dimensions.
- Measure existing screens. If the nameplate is missing or unreadable, remove an existing screen and measure the frame dimensions directly. For round screens, measure the inside diameter. For rectangular panels, measure the length and width.
- Record the mesh size. Note the mesh count on your current screens so we can match the replacement.
For step-by-step instructions, see our how to measure your screens guide. You can also send photos of your nameplate and screens to our team for identification.
How Do I Order Compatible Screens for My Rotex Screener?
Ordering compatible replacement screens is straightforward:
- Identify your equipment. Determine your Rotex model, screen type (round or rectangular), and screen dimensions from the nameplate or by measuring.
- Determine your mesh size. Know the mesh count or particle size cutpoint your application requires. Our mesh size chart can help convert between mesh numbers, microns, and inches.
- Choose your material. Select 304 SS, 316 SS, T-430, or carbon steel based on your product and process requirements. See our material selection guide.
- Select your screen type. Standard single-layer, self-cleaning ball-deck, or sandwich screen based on your material characteristics.
- Request a quote. Request a quote with your specifications. For standard round sizes, you may also order directly from our online collections.
Need help? Email sales@screenerking.com or call our team. We typically respond within 2 hours during business hours.
Why Choose ScreenerKing for Rotex Compatible Screens?
Rotex has earned its position as a leader in gyratory screening through decades of engineering excellence and proven performance across demanding industrial applications. ScreenerKing complements that quality by providing compatible replacement screens and parts that match OEM specifications while delivering additional value:
- Significant cost savings. ScreenerKing compatible screens typically cost 30% to 50% less than OEM screens, resulting in meaningful annual savings for high-throughput operations.
- Faster delivery. Most standard screens ship within 1 to 3 business days from our Houston, Texas facility, reducing downtime when you need replacement screens quickly.
- Same quality materials. We use identical grades of stainless steel and wire cloth as OEM manufacturers. Our screens are tensioned, bonded, and inspected to the same performance standards.
- Made in the USA. All ScreenerKing screens are manufactured in Houston, Texas.
- 30+ years of experience. Our team has over three decades of vibratory screening expertise and understands the specific demands of gyratory reciprocating screening technology.
- Free technical support. Our engineers provide free application advice to help you select the right screen, mesh size, and material for your process.
Frequently Asked Questions: Rotex Compatible Screens
Does ScreenerKing make replacement screens compatible with Rotex screeners?
Yes. ScreenerKing manufactures replacement screens compatible with Rotex gyratory reciprocating screeners and round vibratory separators. Our screens are built to match OEM frame dimensions and material specifications for direct-fit installation in Rotex equipment. We offer screens in 304 SS, 316 SS, and T-430 stainless steel across mesh sizes from 4 mesh to 500 mesh.
Are ScreenerKing screens compatible with the Rotex gyratory reciprocating motion?
Yes. Our screens are manufactured to the same tensioning and bonding standards as OEM screens, ensuring they perform correctly under the unique gyratory reciprocating motion pattern that Rotex equipment uses. The screen cloth, frame fit, and overall construction are engineered to withstand this motion for the full expected service life.
Will using ScreenerKing screens void my Rotex equipment warranty?
No. Under the Magnuson-Moss Warranty Act, equipment manufacturers cannot void your warranty simply because you use a compatible aftermarket part. ScreenerKing screens are manufactured to the same dimensional and material specifications as OEM screens and will not cause damage or performance issues with your Rotex equipment.
Does ScreenerKing supply parts for Rotex rectangular gyratory screeners?
Yes. In addition to round separator screens, ScreenerKing can manufacture screen panels for Rotex rectangular gyratory reciprocating screeners. Contact us with your model number and panel dimensions for a custom quote.
What mesh sizes are available for Rotex compatible screens?
ScreenerKing offers compatible screens for Rotex equipment in mesh sizes from 4 mesh (coarse) to 500 mesh (ultra-fine). Self-cleaning and sandwich screen configurations are available for difficult-to-screen materials. See our mesh size chart for the full range of available mesh sizes.
How do I determine the correct replacement screen for my Rotex screener?
Check the nameplate on your Rotex equipment for the model number and screen dimensions. For round separators, note the screen diameter. For rectangular machines, record the panel length and width. Then contact ScreenerKing with this information along with the mesh size you need. Our OEM cross-reference chart and application engineers can help you identify the correct replacement.
How quickly can ScreenerKing ship Rotex compatible screens?
Standard compatible screens typically ship within 1 to 3 business days from our Houston, Texas facility. Custom sizes and specialty configurations may require 5 to 10 business days. Rush orders are available. Contact us for current lead times on your specific configuration.